Based on Natural Resources Canada’s (NRCan) approved guidelines. Refer to NRCan’s Fuel Consumption Guide available at https://fcr-ccc.nrcan-rncan.gc.ca/en for more information. Full battery charge and ideal conditions are required. Figures will vary based, amongst others and non-exclusively, on driving and charging habits, speed, accessory use, weather and temperature, battery age, vehicle condition, road condition and other factors. In sub ideal conditions, figures may worsen by more than 50%. Battery capacity decreases with time and use which will further reduce range. See the owner’s manual or NRCan’s Fuel Consumption Guide for details.
|
|
What OEM equipment is available to reprogram Subaru vehicles? How do I obtain the tools?
Subaru Canada, Inc., does not offer a dealer diagnostic tool rental program or any lease arrangements.
For aftermarket service providers, reprogramming can be performed using the Hitachi Diagnostic System (HDS). The HDS is available through Blue Streak Electronics (BSE). The HDS tool provides the aftermarket with exact same functionality as the Subaru Dealer diagnostic tool Subaru Select Monitor III (SSMIII). To order the HDS kit, contact BSE at the website link or telephone number below.
Blue Streak Electronics
45 Basaltic Rd
Concord ON L4K 1G5
Tel: (905)669-4812
Fax: (905)669-5179
Email: info@bsecorp.com
Website: http://www.bsecorp.com/hds.php
Note: Subaru Canada, Inc. does not offer technical support for diagnostic tools that are not sold by Subaru and will not answer specific questions based on the operation or performance of these devices. All questions pertaining to this device should be directed to Blue Streak Electronics at the above contact information.
What J2534 reprogramming capabilities are available?
(A) J2534 Reprogramming
Subaru reprogramming files using generic (non-OEM) SAE J2534 a pass-thru vehicle programming device are available by contacting Service Technical Information Company (586) 783-1334. The cost for the CD-ROM with all reprogramming files is $75.00 USD plus S/H. Files will be updated four (4) times per year, in CD-Rom format, with all available reprogramming service information at the same above offered cost. Authorized Subaru Dealers are provided the same reprogramming information during quarterly updates.
Subaru J2534 Reprogramming software meets the latest available J2534-1 specification.
Note: It is possible to damage the vehicles ECM/TCM during the reprogramming event. Once the reprogramming process has started, it is recommended not to interrupt the process until the event is completed. If you experience any problems, please contact your scan tool maker for further instructions.
(B) Are all pre-2004MY Subaru vehicles compatible with J2534?
No. Subaru has no reprogramming capability for model years 1996-1998. Both pre-J2534 reprogramming and J2534 pass thru reprogramming files are included in the offered HDS kit software for aftermarket service provider application.
|
|
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY.
Subaru Service and Repair information is intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely.
Subaru Canada, Inc. is “ISO 14001 Compliant”
The International Standard for Excellence in Environmental Management Systems.
Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, provincial and federal laws and regulations.
|
|